broken – The KFM Blog

Five Most Common Problems With Vertical Blinds

OK today, I am going to be showing you the five most common problems with vertical blinds.

00:13 One of the most common problems is simply a blind slat being out of step something as simple as this where it is just going to hang up and now your blinds are not going to turn and open up.

So first thing is your going to want to go along and make sure that all of your blinds are in a row and that’s one of the most common problems.

00:35 Another most common problem is a broken blind slat itself often they will break off right here and what you can do is flip your blind slat over and use a hole punch and punch some new holes and than re hang it up.

If you want to you can trim it off straight or you can get replacement slats and trim them down. I have a video on those repairs, video on that repair and I will try to put the link on this video so you can click over to it.

01:02 The Third most often repair that’s needed is a stripped master gear now as I showed you if one of the deals was hanging up or the blinds were hanging up and someone continued to try to force it. It can strip the master gear. And there is a couple of different types of master gears this one is a
self aligning master gear it links underneath the first slat. This one you can take out these screws and link it to the first carrier. I’ve got a video on that also so I will try to put the link on here.

01:35 Fourth most common type of repair that is needed is where you have an individual blind that is not turning all the other ones are turning just fine. And that one individual blind is not turning.

What’s needed is either the head the uh… the gear herehas got some broken teeth on it or the comb gear itself has broken off and these can be replaced.

I also have a video on that I will put the link on this video it is for the stem
and comb gear.

02:05 And the Fifth most common problem with vertical blinds is that the blinds are hard to open. Now, this one is not so bad, it slides pretty easy, but if you had a set that was hard to open what you want to do is lube it with silicone spray. Apply it to the entire length inside the track. And it is not the best smelling stuff in the world but it really does a good job in lubing the blinds because what it does silicone lube dries and it still maintains its lubricant qualities. And because it dries it is not going to collect as much dust and dirt and debris and than clog up.

Anyway once you put it on let it dry for about 15 minutes and than go ahead and work the blinds in and you are good to go.

And that is the five most common problems with vertical blinds.
There’s a few others. I will try to add them on later but that’s about the five most common.

Washing Machine: Five Most Common Problems Blog

OK, today I wanted to go over the five most common problems with washing machines with you.

00:19 The number one most often problem with washing machines is a washing machine that doesn’t drain or spin, most often caused by a broken lid switch.

You should hear a click as this goes into place. If you don’t hear that click then your, or if your washing machine is not going into its final cycles
it’s most often this lid switch here.

Sometimes you can just press on this right side and get it to engage the switch. Also occasionally you can just adjust the post a little bit
so that the post will stick further into the switch which will engage the switch. Also sometimes you can just adjust the switch or tighten it up.
Often it needs to be replaced I have a video on that.

01:05 Second most often problem with washing machines often goes undetected something you’d probably want to check regularly is that your agitator dogs are working properly. What it should do is turn the bottom one-way or the other. So this one is turning it like it should and the agitator dogs are functioning. Now if it’s not doing that than your clothes are just getting rinsed. They are not really getting washed. It is an often missed
problem with washing machines. And it is probably very common because the agitator dogs inside here are designed to break if someone’s arm was to get stuck in here or if something was to bind up too much the agitator dogs will actually strip on purpose as a safety mechanism.

01:50 Third most common problem with washing machines is a clogged pump at the impeller. Sometimes a penny or a button, or something else, a bobby pin, whatever goes down the drain line and gets stuck at the pump.

02:05 Fourth most common problem is a leak. Most often leaks occur up on the left side.

Fifth most common problem is a washing machine out of balance. Now the most often cause of the machine being out of balance is just a matter of redistributing the clothes. Usually a towel or something gets on one side and you hear the whump whump whump whump of the machine.

What you need to do is open the lid and than go ahead and readjust the clothing or go ahead and readjust the towel. Readjust the items in the bin to get it more balanced. Then go ahead and run it again see if it works out and you have no more out of balance deal.

Sometimes you could lose a spring. Most often times it’s just that the
machine is out of balance. Eventually I’ll have to make you a video showing you how to reset the spring if it did come off.

There are three different shocks and then there is a spring that holds the machine basin in place.

Now the way to check if your machine is still in balance is just ahead and run it empty with water. Let the water fill up. If the machine finds its balance than you know it was just a matter of the clothes or the laundry items being out of balance

Anyway that is the five most common problems with washing machines!

~ TFW ~..~ KFM ~