future

Here are some quite interesting videos on the application of 3D printing to construction. It seems to be very promising for the future when combined with concrete and has the potential to completely revolutionize the way we construct homes and office buildings.

There is a lot of waste and areas for improvement under current construction methods and the following ideas seem to lean towards an inevitable means of cost savings, time savings, energy savings, energy efficiency and safety improvements. Though I think it sad that many jobs may change, I still think it useful to understand and be ahead of these changes so that those who are in the industry can better position themselves for the future.

I hope to be doing more posts soon on many possible advancements in technology of maintenance and construction. Your sharing this post will help let me know the level of interest in the subject of technology as it applies to maintenance and construction.

~ Build On
~ KFM

Let us say you go to open your vertical blinds and oh no, the blinds won’t open. The first thing to check for is any blind slats that are out of line with the others. Look for any that are overlapping the others the wrong way and push the top corner to set it the right way. This is the most often needed repair for vertical blinds. Blinds often get out of alignment due to wind, people, pets, vacuums, chairs etc…

A bigger problem is when one of the gears gets turned out of step with the other gears. The repair is performed by turning the stem the right way. Sometimes you can grab the stem and turn it with your hand. Take care not to bend the slat itself or it may break. Often you will need or want to remove the slat. That makes it easier to grab the stem with a pair of pliers and then pop it over.

This repair sometimes causes a gear tooth to break. Replacing stem gears is fairly easy and I will try to make a video for that repair in the future. I cover all of these repairs and much more in my book, Kung Fu Maintenance. I have another video at present titled The Master Blind Gear. I hope you like it and that it serves you well. It covers (as you probably guessed) how to replace a stripped master blind gear controller for vertical blinds.

Be extra careful when working with blinds and appliances as the metal is often unfinished metal and very sharp. I have given blood numerous times. A little precaution makes for a better day.

~~~ Get Vertical ~~~ Stay Above Horizontal ~~

~~~~~~~~~~~~~~~~~~ Kung Fu Maintenance ~~~~~~~~~~

Quite Possibly The Printable Concrete Future Of Construction

Getting Vertical ~ Repairing Vertical Blinds